Welcome to Al-Aqsa Wood Working Machines and Tools

Call Now : (+971) 65430301

Mail Us : info@alaqsatradinggroup.com

Machines> Circular Saw With Tiling Blade Casadei

Circular Saw With Tiling Blade Casadei 

Circular Saw With Tiling Blade Casadei

Technical data

Max. squaring stroke

3200 mm 

Cutting width on rip fence

1270 mm

Table dimensions

940x560 mm 

Max. diam. of saw blade with scoring unit installed

400 mm

Saw blade tilting

90 - 45°

Max. saw blade projection at 90° from table with blade:  ø 400 mm 

136 mm 

Max. saw blade projection at 45° from table with blade:  ø 400 mm 

97 mm

Exhaust outlet diameter

120 mm 

Blade protection with exhaust outlet diam.

60 mm

Main motor power (S6-40%)

6,6 HP 50 Hz

Scoring unit motor power (S1)

0, 75 HP 50 Hz

Standard Version
  • Ribbed cast-iron worktables 
  •  Saw blades lifting and tilting by handwheels 
  • Independently powered scoring unit with blade ø 120 mm,  Z=20 
  • Anodized aluminum alloy carriage. The high precision hardened steel guides are fixed on the carriage  by  means of a mechanical bending system that allows fast and  precise movements 
  • Readout of saw blades tilt on the machine front side 
  • Crosscutting support with dimensions 1200x650 mm. The device includes a telescopic fence tilted towards the operator with 2 crosscut flip-over stops and eccentric clamping, one telescopic support, and one idle roller to facilitate the panel-loading/unloading.
  •  Rip fence with micrometric adjustment and locking system by an eccentric pin.
  •  The cylindrical sliding bar for rip fence with rectified steel round bar ø 45 mm.
  •  Eccentric clamping.
  •  Table with an extension on the outfeed side.

MOD. SC 40 P

MOD. XENIA 40

Technical data

Squaring capacity with extended stop

3200x3200 mm 

Max. blade diameter 

400 mm

Blade tilt

45 gradi

Max. cutting height with 400 mm blade at 90° 

140 mm

Max. cutting height with 400 mm blade at 45°

92 mm

Blade rotation speed 

3700 g/min 

Scoring unit rotation speed

8500 g/min 

Scoring unit diameter

120 mm 

Diam. of exhaust outlet at base 

120 mm 

Blade protection with exhaust outlet diam. 

60 mm

Cutting width on rip fence 

1270 mm

Motor power (S6) 

 9,5 HP 50 Hz 

Scoring unit motor power (S6) 

 1,7 HP 50 Hz 

Saw Spindle Diameter 

30 mm

Standard Equipment

Anodized aluminum alloy carriage sliding on hardened and steel guides, which are fixed on the carriage by means of a mechanical bending system (360 mm x 3200 mm)

 

  • Saw carriage locking from operator's position 
  •  Sawblade lifting and tilt by means of handwheels on the front of the machine (XENIA 40)
  • IReadout of saw blade tilt on the front of the machine 
  • Independently powered scoring unit (without blade) with external set up
  • The squaring frame which allows a fast fence positioning during angular cuts
  • Manual rip fence sliding on steel bar ø 40 mm with micrometric adjustment with position reading on the metric rule
  • Table extension on outfeed
  • Overload switch protection
  • Emergency pushbutton
  • Padlockable main switch
  • Auxiliary low voltage circuit (110 Volts)
  • Direct start main motor   

CODE

DESCRIPTION

CA.50.07

Eccentric clamp

Optional Settings Included:

MOD. SC 30

Technical data

Max. squaring stroke

3200 mm 

Cutting width on rip fence 

900 mm

Max. diam. of saw blade with scoring unit installed

315 mm

Saw blade tilting

90 - 45° 

Table dimensions

560 x 840 mm 

Max. saw blade projection at 90° with blade

ø 315 mm 

ø 300 mm

ø 250 mm

100 mm

92 mm

68 mm

Max. saw blade projection at 90° with blade

ø 315 mm 

ø 300 mm

ø 250 mm

71 mm

68 mm

 48 mm

1 exhaust hood (frame) diameter

120 mm 

1 exhaust hood (saw protection) diameter

60 mm

Motor power  (S6)

 (5,5 HP) 50 Hz 

Standard Equipment
  • Worktable made of ribbed-cast iron 
  • Cast-iron saw carriage with lifting by means of "dove-tail" guide and tilting by side supports
  • Anodised aluminum carriage with sliding on high precision hardened steel guideways 
  • Rip fence with eccentric locking system and micrometric adjustment. The fence is equipped with cast-iron support and rectified steel round sliding bar of ø 45 mm. 
  • Table with an extension on the outfeed side
  • Squaring frame (dimensions 1200x650mm). The device, with telescopic swinging arm support, includes a telescopic fence, 2 crosscut flip-over stops, an eccentric clamping, and an idle roller for panel loading and unloading
  • Saw blade protection placed on the riving knife
  • Saw unit adjustment by fixed handwheels 
  • Readout of saw unit tilting 
Machine Included Of:

CODE

DESCRIPTION

5665

Version with maximum squaring stroke 3200 mm 

2160

Scoring unit with independent motors 

2164

Cutting width with parallel fence 1270 mm