Welcome to Al-Aqsa Wood Working Tools!
Call Now : (+971) 65430301
Mail Us : firstname.lastname@example.org
Machines> CNC Drilling Machine
STARTECH CN V is the new CNC drilling machine with fixed worktable and mobile workpiece.
Max. panel dimensions X-Y-Z
3000 x 900 x 50
Min. panel dimensions X-Y-Z
300 x 90 x 10
Max speed X-Y axes
m / min
7 (4X-4Y one is shared)
Vertical spindles (along Y axis)
Horizontal spindles (along X axis)
Fixed integrated blade
cutting into direction X
Max. blade diameter
Max. blade thickness
Spindles rotation speed
Blade rotation speed
380 / 400 (50 / 60)
Minimum installed motor power
Compressed air pressure
Extraction air consumption
m3 / h
Exhaust air speed
m / sec
R0.03.36: STARTECH CN V CE VERSION
F11L drilling head
Base and working table:
structure made of tubular welded steel to create a large support surface, on which the worktables are fixed. Electrical cabinet integrated into the base. Worktable made of phenolic material with grooves to allow through drilling. Worktable made of phenolic material with grooves to allow through drilling. Panels sliding on a roller conveyor to facilitate the movement.
Clamp for the panel movement
The gantry structure is made of tubular welded steel which supports the main operating group.
consisting of drilling head with 7 vertical spindles, 4 horizontal spindles and integrated blade.
Movement of work piece and operating group:
A suction cup, directly controlled from the NC, locks the panel to be processed and positions it in sequence under the operating head to execute the requested machining Sliding along "X", "Y" and "Z" axes of prismatic linear guides with recirculating ball bearings and transmission through recirculating ball screws Group positioning and machine motion are carried out by means of direct current motors.
NC Control Unit:
Control Unit designed for drilling machines NC
58.05.78: Cooling fans for electric cabinet
58.05.92: Device to increase the drilling pressure along Z axis
58.05.96: Automatic lubrication
58.05.88: Maestro cnc" programming software
This option is advisable in environment with temperatures over 35°C.
N.B. It is suggested for the machining of hard material,
The correct grease level on the machine moving parts is always maintained by means of an electronic control
Minimum characteristics required for the software installation in the office: